This chalice case accomodates a chalice up to 9 1/8 in. high 6 1/4 in. wide and 6 1/2 in. deep. This case will hold a 6 1/2 in. paten.

This is a brass gold-plated paten with hardwood handle.  The paten has a diameter of 6-7/8 inches.  Comes with a high-quality vinyl/cloth cover.  The handle measures 7 inches long.

Adjustable Advent Wreath, solid brass. Height will vary from 48 in. (level) to 55 in. in tilted position. Candles will always stay upright. Furnished w 1 1/2 in. sockets, or adapters for oil …

Incense boat and spoon with satin brass finish. Options show additonal price (if applicable).

20 in. brass with walnut handle.

This Knights of Columbus commemorative chalice is gold plated and has an enameled K of C emblem.  Includes 5 1/2in. scale paten. Ht. 6in., Cup 3 3/4in., 10oz.

This devotional candle stand is 24k gold-plated and 3 5/8in. tall. Cast base. 6 day candle not included.

21in. diameter. Advent wreath only with 1 15/16 in. black delrin plug as shown. 1 1/2in. diameter candles not included .  

36. in. solid brass with walnut handle.

Rigid, non-removable, two-tone finish. 12 in. base, 21 in. ring. Height to top of ring 48 in., sockets 1 1/2 in. Center adaptable to any size candle. Candles not included.

This deluxe incense burner/censer is 7 1/2in. tall and 3 1/4in. in diameter. The many cross-shaped holes allow for good air circulation. The censer is available in statuary bronze …

This Knights of Columbus commemorative chalice is made from stainless steel and has an enameled K of C emblem.  Includes 5 1/2in. scale paten. Ht. 6in., Cup 3 3/4in., 10oz.

This brass candle lighter is 24in. long and has a solid walnut handle.  Made in the USA.  

This stainless-steel baptismal oil set comes with oil stock, sacred chrism and cotton packed in a hard-cover carrying case. This kit is also available in gold plate.

Portable 16in. stainless steel bowl; satin bronze cover.  Overall height 13in.

This Brass Banner Stand is non-processional.  It has a telescoping shaft, which extends 51in. to 90in.  The base is 9in. in diameter.  The cross arm is 30in.

This 7 light altar candelabra has adjustable brass arms and 7/8in. sockets.  Center post is available in dark or light oak. Height: 18in. Base Diameter: 7in.

Thir relic holder is 24kt gold plated with a hinged see-through display cover.  Comes gift boxed. Large: 2 1/8in. x 1/2in. Small: 1 1/2in. x 1/2in.

Needle eye holder for taper, extends 48 in. to 72 in. Satin.

This candle lighter is 8 3/4in. long and 24kt gold plated with a wedding ring emblem on the side.  Comes gift boxed. Made in the USA.

This Satin-finished Brass Processional Banner Stand is furnished with a removable telescoping shaft which extends from 51in. to 90in.  The base is 10 1/2in. in diameter and the cross arm is …

This large votive stand is 6in. tall with a 5 1/2in. base.  Bright gold finish. Glass cylinder not included.

This bracket can be mounted underneath an altar or other table and is used to keep the cloth in place.

This communion paten has high edges and is gold plated.  Handle is square walnut.  Includes a deluxe vinyl case. Diameter: 7in.

This censer (thurible) is 9in. tall and comes with a matching boat with spoon.  High polish pictured. Made in USA. Censer: A vessel suspended by chains, and used for burning incense at solemn …

This votive stand is made from wrought iron with bras plated husks.  Holds 24 seven-day globes (not included). Height: 50in. Width: 36in. Depth: 21in.

These exquisite Stations of the Cross are cast in solid bronze.  The average size of each figure is 7" high and 6" wide.  Resurrection plaque is optional.

This intinction Set is 6" in height and 7 1/2 inches in diameter.  The capacity is 400 hosts.  Cup is removable.

This ostensorium (monstrance) is gold plated with a contrasting cross in silver.  Four ruby glass stones.  Ht. 24in., base 9in. secure acrylic glass luna 2 3/4in., wt. 6lbs. Custom …

Glass 10 oz. cruets with stainless steel tray. Tray: 6 1/2in. x 9 1/2in.

This intinction Set is 7 1/2 inches in diameter.  The capacity is 400 hosts.  Cup is removable.

This intinction set is made with a removable cup.  Bowl has a 7 1/2" diameter and has a 400 host capacity.  Plated with gold.

The bottles in this set are engraved with the letters standing for each oil.  They are: OS, SC, and OI.  The bottles have screw off tops and glass oil compartments.  Blue case …

This Processional Satin Brass Banner Stand telescopes from 51in. to 90in.  This stand has a 32in. double cross arm.  Any type of banner may be attached by removing one screw and sliding …

Price is for single torch.  Stand sold separately. Brass plated with walnut shaft.  Overall Height 5'.  3" x 8" glass globe included. 10 hours votive glass holder.  …

This black vinyl paten carrying case measures 8in. x 7in. Paten not included.

This sick call set comes in a soft gray suede zipper case and includes a 24kt gold plated pyx, sprinkler, oil stock, stole, and two finger cloths. Case: 4 1/4in. x 6 1/2in. x 1 1/2in.  

This bright gold-plated votive stand is 5 1/2in. tall and holds a 7 day globe and candle. Glass and top are not included.

These exquisite Stations of the Cross are cast in solid bronze and mounted on a solid wood plaque.  The average size of each figure is 7" high and 6" wide and the size of the plaque …

Wrought iron with spikes (for pillar candles) and brass bobeches. Base 10", 20" diameter, Height 3".

This Eastern Rite credence paten is gold plated and made in the USA.  Available with a 6in. or 7in. diameter. Height: 3 3/4in. Base: 5 1/2in.

This chrismal set is hand cut from imported crystal.  The bottles are engraved with the letters standing for each oil.  They are: OS, SC, and OI.  The bottles measure 16" tall …

This Processional Banner Stand is made of highly polished brass.  The Telescoping shaft extends 51in. to 90in.   It comes with a 12in. weighted base and a 36in. cross arm.

One chain censer and boat in a satin brass finish.  9 inch tall with a bowl measuring  4 1/2 inches.   Options show additional price.

This carrying case is custom designed to fit the gold plated Ostensorium SKU 11636 available here . Outside dimensions given.

Thie electric Sanctuary Lamp is brass plated 12in. tall with a 6in. base.  Comes with a 6in. cord, flicker bulb, and glass globe.  Perfect for use in locations where an open flame would …

This Reliquary has a gold plate finish.

One chain censer and boat in a bronze satin finish.  9 inches tall with the bowl measuring 4 1/2 inches.

This cruet drainer comes complete with a stainless steel tray and 6 posts for draining cruets. Tray: 6 1/2in. x 10in.

These exquisite Stations of the Cross are cast in solid bronze and plated in 24kt. gold plate.  The average size of each figure is 7" high and 6" wide.  Resurrection plaque is …

This Advent Wreath has a brass satin or high polish finish with 1 1/2in. candle sockets.  The center socket can be adapted to any size.  Candles sold separately. Height: 3in. Width: …

This brass plated Sanctuary Lamp stand is 4 1/4in. tall with a 4 1/2in. bass.

Hanging Advent Wreath. Brass two-tone finish. Height 36 in., width 25 in., 4ft. 1 1/2 in. link chain included. Candles not included.

This brass candle lighter is 60in. long with a rigid handle.  Uses wax tapers. Made in the USA.

This brass candle lighter is 60in. long and has a solid walnut handle.  Made in the USA.

This gold plated ewer is part of a set.  The matching basin can be found here . Height: 8in. Capacity: 22oz.

This small reliquary is gold plated and has a secure compartment. Height: 6in. Diameter: 1 3/4in. Depth: 7/8in.

This round candle lighter stand is solid brass with a nylon insert and satin finish.  Base in 9in. in diameter and 13in. tall. Made in the USA. Candle lighter not included.

Beautiful bronze satin finish with plastic liner.  Three angels, oxidized silver.  Height 14 1/2in., diameter 14 1/2in., base 8in.